Ycarus Gentoo ebuild

salfter

These ebuilds come from .

If you have some problems, go to the official site first.

sci-electronics

altium2kicad : Altium to KiCad converter for PCB and schematics ( https://github.com/thesourcerer8/altium2kicad )

apicula : documentation and tools for the Gowin FPGA bitstream format ( https://github.com/YosysHQ/apicula )

ecpprog : A basic driver for FTDI based JTAG probes (FT232H, FT2232H, FT4232H), to program Lattice ECP5/Nexus FPGAs ( https://github.com/gragdavill/ecpprog )

icestorm : reverse-engineered tools for Lattice iCE40 FPGAs ( http://www.clifford.at/icestorm/ )

kicost : generate part-cost spreadsheets for circuit boards developed with KiCad ( https://github.com/hildogjr/KiCost )

kicost-digikey-api-v3 : experimental plug-in to allow KiCost to do native Digi-Key API requests ( https://github.com/set-soft/kicost-digikey-api-v3 )

kikit : Automation for KiCad ( https://github.com/yaqwsx/KiKit/ )

nextpnr : portable FPGA place and route tool ( https://github.com/YosysHQ/nextpnr )

nmigen : A refreshed Python toolbox for building complex digital hardware ( https://github.com/nmigen/nmigen )

nmigen-boards : nMigen boards and connectors ( https://github.com/nmigen/nmigen-boards )

nmigen-soc : System on Chip toolkit for nMigen ( https://github.com/nmigen/nmigen-soc )

pcbnewTransition : support both KiCad 5 and 6 in your plugins ( https://github.com/yaqwsx/pcbnewTransition/ )

prjoxide : documenting Lattice's 28nm Nexus FPGAs ( https://github.com/gatecat/prjoxide )

prjtrellis : reverse-engineered tools for Lattice ECP5 FPGAs ( https://prjtrellis.readthedocs.io )

pyvcd : writes Value Change Dump (VCD) files as specified in IEEE 1364-2005 ( https://github.com/westerndigitalcorporation/pyvcd )

tinyprog : Programmer for FPGA boards using the TinyFPGA USB Bootloader ( https://github.com/tinyfpga/TinyFPGA-Bootloader/ )

yosys : framework for Verilog RTL synthesis ( http://www.clifford.at/yosys/ )

Add an ebuild in portage :

The ebuild is now in the portage tree.

You can also use layman : emerge layman then layman -a salfter

For Paludis use this rsync : rsync://gentoo.zugaina.org/salfter-portage

If you have a problem : ycarus(-at-)zugaina.org